The short answer
A DUMBO chimney usually needs a new liner when the flue is cracked or unlined, or when it serves a new appliance or fuel, such as a boiler converted from oil to gas. ProSweep inspects the flue on camera, sizes a stainless steel or cast-in-place liner to the appliance, and installs it from the roof.
A chimney liner is the inner wall of the flue that carries smoke and exhaust gases up and out of your home. In DUMBO, many chimneys belong to older masonry buildings, such as pre-war apartment buildings, converted loft buildings and rowhouses, where the original flue was built for a different era of heating. When a liner is cracked, missing or the wrong size for the appliance it serves, exhaust can leak into the masonry or the living space. ProSweep Chimney Service installs new chimney liners for homes and buildings in DUMBO, ZIP code 11201, about 2 miles north of our Brooklyn office.
Why Liners Matter in DUMBO's Older Buildings
Many masonry chimneys in this part of Brooklyn were built with clay tile flues. Some older chimneys have no liner at all. Over decades, heat cycles, moisture and settling can crack tiles and wear away mortar joints. A damaged liner can let heat reach nearby wood framing. It can also let combustion gases, including carbon monoxide, seep through gaps in the brick.
The damage is not always visible from the fireplace or boiler room. It often sits several floors up inside the flue. That is why we inspect with a camera before recommending any liner work. Common warning signs include:
- Pieces of tile or crumbling mortar collecting at the base of the flue
- Water stains, white staining or damp spots on walls near the chimney
- Smoke or exhaust odors in rooms or hallways
- A boiler or water heater that has trouble venting or shuts off
Oil-to-Gas Conversions and New Liners
Many New York City buildings have switched their boilers from oil to gas. When a building converts, the chimney has to be evaluated as part of the work, and a new liner is often needed. Gas exhaust produces acidic condensate, and over time that moisture can corrode a masonry flue.
If your building is planning a conversion, bring us in early. That way the liner work can be scheduled alongside the boiler installation instead of after it. The city's heat season runs from October 1 through May 31. During that period, building owners must keep apartments heated to the city's minimum temperatures. For that reason, many buildings prefer to finish heating system work before October.
Liner Options We Install
The right liner depends on the appliance, the fuel and the shape of the existing flue. We size each liner to the appliance it serves. A correctly sized liner lets exhaust draw properly. An oversized one lets exhaust cool and condense on the way up.
- Stainless steel liners: a common choice for gas and oil boilers, water heaters and wood stoves. They are installed as one continuous run from the appliance connection to the top of the chimney.
- Insulated stainless steel liners: used where the flue needs extra protection for nearby combustible materials, or to keep exhaust warm in a tall, cold chimney.
- Cast-in-place liners: a lightweight mortar poured around a form inside the existing flue. This option is useful when the masonry needs to be strengthened as well as sealed.
- Clay tile replacement: an option for some fireplace chimneys where the flue can be reached and rebuilt.
How Liner Installation Works
Every job starts with an inspection. The NFPA 211 standard calls for a Level 2 inspection when the system changes, for example when a new appliance is added or the fuel is switched. A Level 2 inspection includes a camera look at the inside of the flue. If a hidden hazard can only be reached by opening part of the chimney or building, a Level 3 inspection may be needed.
After the inspection, our certified technicians clean and measure the flue. Then they explain which liner fits your appliance and why. Installation usually involves feeding the liner down from the roof, connecting it to the appliance, sealing the top with a cap and checking the draft. In multi-story buildings, we plan roof access and protect hallways and work areas before we start.
When the work is done, we walk you through what was installed and what upkeep it needs.
Keeping a New Liner in Good Shape
A new liner still needs regular attention. The NFPA 211 standard calls for chimneys, fireplaces and vents to be inspected once a year. A yearly visit lets us catch loose connections, corrosion, debris or animal nests before they cause problems.
Besides DUMBO, we install chimney liners in nearby neighborhoods, including Downtown Brooklyn, Brooklyn Heights, Boerum Hill, Cobble Hill and Carroll Gardens.
More services in DUMBO
- Chimney Sweep in DUMBO
- Chimney Inspection in DUMBO
- Chimney Repair in DUMBO
- Air Duct Cleaning in DUMBO
