Skip to content
Serving Brooklyn and nearby cities Mon–Fri: 8 AM–8 PM · Requests accepted 24/7 · (447) 312-7370

Chimney Inspection Levels: What Level 1, 2 and 3 Mean for Your Home

A chimney inspection is not one fixed service. Chimney professionals use three inspection levels, and the right one depends on what has happened with your chimney since it was last checked. The NFPA 211 standard calls for chimneys, fireplaces and vents to be inspected once a year. Most years, that means a Level 1 inspection. When something changes, such as a new appliance, a switch from oil to gas, or the sale of the house, a more detailed Level 2 is the right call. A Level 3 is reserved for cases where a hidden problem can only be reached by opening part of the chimney or the building. This guide explains what each level covers, when you need it, what you receive afterward, and how to get your Brooklyn home ready for the visit.

Why Annual Inspections Matter

The NFPA 211 standard calls for chimneys, fireplaces and vents to be inspected once a year. That covers more than wood-burning fireplaces. Boilers, furnaces and water heaters that vent through a chimney need regular checks too, because their exhaust can damage the flue over time and blockages can push combustion gases back into the home.

In Brooklyn, timing matters. New York City's heat season runs from October 1 through May 31, when building owners must keep apartments heated to the city's minimum temperatures. Scheduling your inspection in late summer or early fall leaves time to handle any chimney repair, chimney sweep or liner work before the heating system is running every day.

Level 1: The Routine Yearly Inspection

A Level 1 inspection is the right choice when your chimney has been used the same way as before and nothing about the system has changed. Our certified technician examines the parts of the chimney, fireplace and connected appliance venting that can be reached without special tools or opening anything up.

  • The exterior of the chimney and the crown, cap and chase cover where accessible
  • The firebox, smoke chamber and damper you can see from inside the fireplace
  • The flue, checked for blockages, nesting material and creosote buildup
  • Appliance connections and basic clearances from combustible materials

Level 2: When Something Changes

A Level 2 inspection includes everything in a Level 1, plus a closer look at the inside of the flue, usually with a camera run up the full length of the chimney. It also covers accessible areas such as attics, crawl spaces and basements where the chimney passes through.

NFPA 211 calls for a Level 2 when the system changes or the home is sold. We also recommend one after a chimney fire, a severe storm, or any event that may have damaged the chimney, since cracks and shifted flue tiles are often invisible from the firebox.

Fuel switches deserve special attention in New York City. When a building converts its boiler from oil to gas, the chimney has to be evaluated as part of the work. A new liner is often needed because gas exhaust produces acidic condensate that can corrode a masonry flue. A Level 2 inspection tells you whether chimney liner installation should be part of your conversion plan.

  • Installing a new boiler, furnace, water heater, stove or fireplace insert
  • Switching fuel, such as converting from oil to gas
  • Buying or selling a home
  • After a chimney fire, severe storm or other damaging event

Level 3: Reaching Hidden Hazards

A Level 3 inspection is needed when a serious hazard is suspected but can't be confirmed from accessible areas. It means opening part of the chimney or the building, such as removing a section of the chimney wall, crown or interior finish, to reach the problem directly.

This level is not routine. We only recommend it when a Level 1 or Level 2 inspection points to a concealed issue, such as structural damage or a deteriorated flue hidden behind masonry. We explain why it's needed and what will be opened before any work starts, so you can make an informed decision. If the findings call for it, the next step may be chimney repair or chimney rebuilding.

What You Receive After the Inspection

You shouldn't have to take our word for what's inside your chimney. After the visit, you get a clear record of what we found and what we recommend.

  • Photos of the chimney exterior, firebox, damper and any problem areas
  • Camera video of the flue interior for Level 2 and Level 3 inspections
  • A written report describing the condition of each component
  • Plain-language recommendations, separated into urgent safety items and maintenance that can wait

How to Prepare for Your Visit

A little preparation helps the inspection go smoothly and lets the technician see everything that matters.

  • Stop using the fireplace or stove at least a day ahead so the firebox is cool
  • Clear furniture, rugs and decorations away from the hearth
  • Make sure there is a clear path to the basement, attic or utility room where appliances connect
  • Secure pets in a separate room
  • Write down any concerns, such as smoke smells, drafts, water stains or noises
  • Have notes ready on recent changes, such as a new boiler or fuel conversion

Inspections

Three levels of chimney inspection

The NFPA 211 standard calls for a yearly inspection. Which level you need depends on what has changed since the last one.

  1. Level 1

    Annual check

    For a chimney and appliance that have not changed and will be used the same way: the readily accessible parts of the chimney, the flue and the connection, checked for soundness, blockages and deposits.

  2. Level 2

    Camera inspection

    When something changed — a new stove, insert or boiler, a fuel switch such as oil to gas, the sale of the home, or a chimney fire, storm or quake. Adds a video scan of the whole flue and the accessible attic, roof and crawl spaces.

  3. Level 3

    Concealed areas

    Only when a Level 1 or 2 points to a hidden hazard that cannot be checked any other way: parts of the chimney or building are opened to reach it.

How each level works

FAQ

Common questions

How often should my chimney be inspected?

The NFPA 211 standard calls for chimneys, fireplaces and vents to be inspected once a year, even if you rarely use the fireplace.

Which inspection level do I need?

If nothing has changed since the last inspection, a Level 1 is usually enough. If you've changed appliances, switched fuel, are buying or selling a home, or had a chimney fire or storm damage, you need a Level 2. A Level 3 is only for suspected hidden hazards.

Do I need an inspection if I'm converting from oil to gas?

Yes. In New York City, the chimney has to be evaluated when a boiler converts from oil to gas, and a new liner is often needed because gas exhaust produces acidic condensate that can corrode a masonry flue.

Does a Level 3 inspection damage my home?

It involves opening part of the chimney or building to reach a hidden problem. We explain exactly what will be opened before starting, and only recommend it when a lower-level inspection shows it's necessary.

Is an inspection the same as a chimney sweep?

No. An inspection evaluates the condition of the system, while a sweep removes creosote, soot and debris. Many homeowners schedule both in the same visit.

When is the best time to schedule?

Late summer or early fall works well, so any repairs can be finished before New York City's heat season begins on October 1.

Get Your Chimney or Vents Checked

Tell us what you're noticing, whether it's a smoky smell, a stain near the chimney or a dryer that won't dry. We'll inspect, show you photos and give you a written price before any work begins.

Call (447) 312-7370 Request Service