Skip to content
Serving Brooklyn and nearby cities Mon–Fri: 8 AM–8 PM · Requests accepted 24/7 · (447) 312-7370

Chimney Cap & Chase Cover Installation in Brooklyn

Serving Brooklyn and nearby cities. Tell us about the job and we’ll call you back to confirm the details.

Tell us what’s going on

Prefer to talk? (447) 312-7370

The short answer

A chimney cap covers the flue opening, and a chase cover seals the top of a framed chimney. Both keep rain, animals and debris out of the flue. ProSweep inspects and clears the chimney top, measures each flue, and installs a properly sized cap or a custom-fit chase cover.

The top of your chimney takes more weather than any other part of the house. A chimney cap covers the flue opening. A chase cover seals the top of a framed chimney box built around a factory-built fireplace or vent. When either one is missing, rusted or the wrong size, rain, leaves and animals have a direct path into the flue. ProSweep Chimney Service measures, fits and installs caps and chase covers for homeowners in Brooklyn and nearby communities. We also check what the open top may have already let in.

Signs You Need a Chimney Cap or Chase Cover

Most homeowners call us after something has already come down the chimney. These are the signs we see most often when a cap or chase cover is missing, damaged or failing:

  • Water in the firebox, or a damp, rust-colored stain on the damper after rain.
  • Animal noises in the chimney, such as scratching, chirping or fluttering from birds, squirrels or raccoons.
  • Debris in the firebox, including leaves, twigs, nesting material, or brick and mortar flakes from a crown that is breaking down.
  • White staining on the brick near the top of the chimney, which shows that water is moving through the masonry.
  • Rust streaks running down the siding of a framed chase, usually from a corroded metal chase cover.
  • A musty or creosote smell that gets stronger in humid or rainy weather, when moisture mixes with deposits in the flue.
  • Poor draft or smoke rolling into the room, which can mean a nest or a pile of debris is blocking the flue.

What's Included

Every cap or chase cover job includes the same core steps, whether we are replacing an old part or covering a flue that never had one.

  • Inspection of the chimney top: the crown, mortar joints, any existing cap or cover, and the flashing where the chimney meets the roof.
  • Removal of nests, leaves and loose debris from the top of the flue.
  • Measurement of each flue, including how far the flue tile rises above the crown.
  • A cap sized to a single flue, or a multi-flue cap that covers several flues at once, with mesh to keep out animals and embers.
  • For framed chimneys, a chase cover measured to the chase, with a sloped or cross-broken top and a drip edge so water runs off instead of pooling.
  • Secure fastening so the cap or cover stays in place in high wind.
  • A look down the flue from the top, plus a camera view where we suspect debris or water damage.
  • Photos of the finished work and written notes on anything else we found.

How We Work Inside Your Home and on the Roof

Most of this work happens on the roof, but we usually need to check the firebox and flue from inside too. Before we open the damper or touch the fireplace, we lay drop cloths from the hearth to the door we came in. If animals or debris have dropped into the smoke chamber, we pull the material out. We run a HEPA vacuum at the opening the whole time so dust and soot stay in the chimney and out of the room. If the flue needs a sweep before the cap goes on, we use rotary brushes from the top or bottom while the vacuum keeps running.

When a flashlight doesn't show enough, we run a camera up the flue to look for nest remains, cracked tiles or water damage. On the roof, the crew works from ladders and roof anchors, and they protect shingles and gutters wherever they set equipment down. If the crown is cracked, we tell you before we install anything. A new cap can't stop water that is already coming through the masonry below it.

The Standard We Follow

The NFPA 211 standard calls for chimneys, fireplaces and vents to be inspected once a year. Chimney professionals use three inspection levels. A Level 1 inspection is for a system where nothing has changed. A Level 2 inspection applies when the system changes, such as a new appliance or a switch of fuel, or when the home is sold. A Level 3 inspection is for a hidden hazard that can only be reached by opening part of the chimney or building.

Most cap and chase cover visits are paired with a Level 1 inspection. If your building has converted its boiler from oil to gas, the chimney has to be evaluated as part of that work. A new liner is often needed, because gas exhaust produces acidic condensate that can corrode a masonry flue. A new liner usually calls for a new cap sized to fit it, so we plan the two together.

New York City's heat season runs from October 1 through May 31. Late summer is a good time to fix the top of the chimney before the boiler or fireplace goes into steady use.

What Affects the Price

We give you a quote after we've seen the chimney. These are the main things that change the scope of the job:

  • Chimney height and roof access, including steep or slate roofs and how many stories up the chimney top sits.
  • The number and size of flues, and whether a single-flue or multi-flue cap is the better fit.
  • Fuel type, since wood, gas and oil appliances call for different cap designs and screen sizes.
  • The condition of the flue tile and crown, and whether either needs repair first.
  • How much debris or nesting material has to come out.
  • Whether a camera inspection or a chimney sweep is needed before installation.
  • For chase covers, the size of the chase and whether the framing underneath has water damage.

How a Visit Works

We start by confirming your appointment window and asking what you've noticed: water, noises, smells, or a cap you can see is missing. When the crew arrives, they first look at the fireplace or appliance connection inside and set up drop cloths. Then they go up to the roof to inspect and measure.

If we can install the cap or chase cover the same day, we do. Custom-sized chase covers and some multi-flue caps are made to measure, so those may need a second trip. Before we leave, we walk you through the photos and explain what we found. We'll also tell you plainly whether anything else needs attention now or can wait until your next annual inspection.

What to expect

How a visit goes

  1. Inspect first

    We look at the whole system before suggesting anything, so recommendations are based on what we actually see in your chimney or vents.

  2. Show you the evidence

    We take photos of the flue, crown, damper or ductwork and walk you through them, so you can see the condition for yourself.

  3. Leave the house clean

    We lay down drop cloths, seal off the fireplace opening and use vacuums built for soot and debris, then clean up before we leave.

FAQ

Common questions

Do I need a chimney cap if I don't use my fireplace?

Yes. An unused flue is still an open hole in your roof. Rain, leaves and animals can get in whether or not you light a fire, and water sitting in the flue can damage the tile, damper and masonry over time.

What is the difference between a chimney cap and a chase cover?

A chimney cap sits over the flue opening on a masonry or metal chimney and keeps out rain, animals and debris. A chase cover is a metal panel that seals the entire top of a framed chimney box, with the flue pipe passing through it. Many framed chimneys need both.

What if an animal is still in my chimney?

Tell us when you book. If an animal is still inside, you may need a wildlife professional to remove it first. Once it's out, we clear the nest and debris and install a cap so animals can't get back in.

Will a chimney cap hurt my draft?

A properly sized cap with enough clearance above the flue shouldn't affect draft. Problems usually come from caps that are too small, set too low, or have mesh clogged with soot or leaves. We size each cap to the flue and the appliance it serves.

Why is my chase cover rusting?

Many original chase covers are thin galvanized steel with flat tops that hold water. Once the coating wears off, they rust and leave streaks down the siding. We replace them with a cover that sheds water and is made of material suited to the job.

How long does installation take?

Most standard caps go on during the first visit, along with the inspection. Custom chase covers and some multi-flue caps are made to measure after that visit, so installation happens on a second trip.

Get Your Chimney or Vents Checked

Tell us what you're noticing, whether it's a smoky smell, a stain near the chimney or a dryer that won't dry. We'll inspect, show you photos and give you a written price before any work begins.

Call (447) 312-7370 Request Service